Authorized distributor
Master Fluid Solutions WDG GmbH.
drlab.sk - Distribútor kovoobrábacích kvapalín TRIM®, produktov Master STAGES™ a WEDOLiT ™ pre Slovenskú republiku.
Authorized distributor
Master Fluid Solutions WDG GmbH.
drlab.sk - Distribútor kovoobrábacích kvapalín TRIM®, produktov Master STAGES™ a WEDOLiT ™ pre Slovenskú republiku.

Shop

Industrial oils

Hydraulic, transmission, circulating, multi-functional and sliding line oils

TRIM® C120 CG

Synthetic fluid designed for grinding carbides as well as ceramics, cermets, cold cast alloys and tool steels

Molyslip MWF

Patented performance lubricant based on molybdenum for threading, drilling, reaming and pressing

ALPHA 2000-HD

Unique universal plastic lubricant

LHL-X100

Special plastic lubricant for CNC machines (Doosan, Mazak, Makino and others.)

Citrax EP No.1

Special lubricant for automatic lubrication of CNC machines (MAZAK, DOOSAN and others)

GUNSHIELD™ CLP®

Cleaning, lubricating and preserving agent for weapons. Approved by the Army of the Czech Republic no. C-VZ-1.1-6.3

COMBAT spray

Cleaner and preservative

VCI bags, VCI paper, dryers

Interoperation conservation and anti-corrosion protection during transport from the manufacturer to the customer

BONDINI PLUS

Superglue

AQUASOL

Concentrated universal degreaser

CoolPAK™ S5628

Universal Semi-Synthetic CoolPAK™ S5628 is a medium to highly lubricating, semi-synthetic, micro-emulsion coolant.

Dosatron

Precise proportional liquid dispenser

Mixing valve

Serves for mixing water-dilutable concentrates

Oil separator

Serves to remove separated fats and oils from the surface of metalworking fluids

Vacuum cleaner

Serves to suck liquids directly into the barrel

Level gauge

Into 200-liter and 60-liter barrels

Master STAGES ™ NOCOR® E6

Emulsion corrosion inhibitor concentrate with low VOC content

Master STAGES ™ NOCOR™ S2

Water-soluble corrosion inhibitor

Master STAGES ™ RPO 6BF

Corrosion inhibitor, barium free, low odor

Master STAGES™ CLEAN F2™

Non-butyl floor and multipurpose cleaner

Master STAGES™ Whamex™

Machine tool system cleaner

TRIM ® SC440SW

Semi-synthetics with low foam

TRIM® C116

Low-foaming synthetic liquid

TRIM® C276

Purely functioning synthetics

TRIM® C360

Cutting and grinding fluid concentrate

TRIM® E715

Emulsion for machining various metals TRIM® E715 is a high quality universal soluble oil that requires minimal maintenance even in the most demanding fluid control systems. It is widely used in machining and grinding on a wide range of materials. The high level of chemical and mechanical lubricity in this product can handle medium to highly demanding machining and grinding. The stable and predictable performance of the TRIM® E715 makes it the first choice for high-quality, consistent part production. A very stable formula provides a long service life with consistent performance Extremely resistant to hard water Non-chlorinated and non-sulfurized extreme pressure (EP) additives control leading edge (BUE) Extremely fine soluble oil emulsion reduces total operating costs Rapid wetting to get the fluid into the cut and fully cover the workpiece and chips for excellent corrosion protection Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron and yellow metals Easily recyclable or disposed of without special handling or equipment It works effectively for a long time without the need for expensive additives Approved by: Safran Group

TRIM® E720

Emulsion intended for machining and grinding of copper alloys TRIM® E720 is a high-quality universal soluble oil with a wide range of applications for machining and grinding a wide range of materials. The high level of chemical and mechanical lubricity in this product can handle medium to heavy machining of aluminum and stainless steel. The inhibitor package in TRIM® E720 is also particularly suitable for machining copper alloys without staining unsightly machine parts. A very stable formula provides a long service life with consistent performance Tolerant to hard water Non-chlorinated and non-sulfurized extreme pressure (EP) additives control leading edge (BUE) Extremely fine soluble oil emulsion reduces total operating costs Rapid wetting to get the fluid into the cut and fully cover the workpiece and chips for excellent corrosion protection It works effectively for a long time without the need for expensive additives

TRIM® E950

High-performance machining fluid based on vegetable fats TRIM® E950 is a proprietary blend of premium lubricity vegetable oils and additives to achieve very high performance and low metalworking fluid consumption. This premium product is easy to use, mainly due to its minimal contact nature and low chemical smell. TRIM® E950 is durable enough to provide long-term durability and also prevents the usual odor usually associated with traditional emulsions. Unrivaled lubricity provides exceptional surface quality and tool life on difficult to machine aluminum alloys, inconel, titanium, stainless and high strength steels. Provides exceptional lubricity Very long cartridge life and low yield lead to low operating costs Low foam even in areas with soft water Tolerant to hard water Non-chlorinated and non-sulfurized extreme pressure (EP) additives control leading edge (BUE) in demanding operations on aircraft materials Compatible with all materials except magnesium Easily recyclable or disposed of without special handling or equipment It works effectively for a long time without the need for expensive additives Approved by: GE AVIO Rolls-Royce

TRIM® MicroSol™ 515

Concentrate of cutting and grinding fluid

TRIM® MicroSol™ 585XT

Semi-synthetics with an extended service life without chlorine TRIM® MicroSol™ 585XT is a high-performance micro-emulsion coolant. Thanks to its composition, it provides extended life of the filling and better foam control compared to the semi-synthetics of the previous generation. TRIM® MicroSol™ 585XT provides excellent cooling and mechanical lubricity. This premium coolant is also very gentle on the machine. It is particularly suitable for processing and grinding gray cast iron and also for non-ferrous metals. TRIM® MicroSol™ 585XT has proven itself as an exceptional machining fluid for titanium alloys. It significantly extends the lifespan, does not contain biocides or fungicides Does not contain formaldehyde Low foaming for demanding high-volume, high-pressure applications Compatible with a very wide range of materials including steel, copper, aluminum alloys and many plastics and composites Optimized combination of cooling and lubrication for titanium machining An excellent alternative to fluids with a high mineral oil content on high silicon aluminum alloys It does not contain any nitrites, phenols and chlorinated or sulfur EP additives Provides excellent corrosion protection on all ferrous and non-ferrous metals It does not pollute machines and leaves a minimalist soft liquid film for easy cleaning and reduced maintenance Easy recycling and disposal Approved by: Aerojet Airbus Appilet Materials Boeing Bombardier Aerospace Fokker GE Aviation Lockheed Martin/Sikorsky Lord Corporation Raytheon Technologies/Collins Aerospace/Pratt & Whitney Rolls-Royce Safran Group

TRIM® MicroSol™ 590XT

Advanced technology of semi-synthetics for the aviation industry TRIM® MicroSol™ 590XT is a semi-synthetic, micro-emulsion coolant, environmentally friendly. Composed of the gentlest ingredients to meet the strict requirements of the aviation industry. It uses the latest technology to ensure long-term durability and excellent protection of sensitive alloys. TRIM® MicroSol™ 590XT is performance improved compared to previous generations. Thanks to its composition and stability, it is popular among environmentalists, safety experts and demanding production managers. Meets the strictest specifications for aviation Protects and prevents corrosion of sensitive alloys, including aerospace and nuclear components Without chlorine, formaldehyde, phenols, boron and secondary amines It significantly extends the lifespan, does not contain biocides or fungicides Low foaming for demanding high-volume, high-pressure applications Optimized combination of cooling and lubricity for aluminum, titanium, steel, stainless steel and Inconel ® machining applications An excellent alternative to soluble oils on aluminum alloys with a high silicon content Provides excellent corrosion protection on all ferrous and non-ferrous metals Keeps machines very clean and reduces overall maintenance Approved by: Airbus Boeing Bombardier Aerospace Dassault Lufthansa Technik Raytheon Technologies/Collins Aerospace/Pratt & Whitney Safran Group

TRIM® MicroSol™ 690XT

Premium semi-synthetics with high lubricity and low foaming TRIM® MicroSol™ 690XT is a high-performance, semi-synthetic, micro-emulsion coolant. Due to its composition, it provides extended filling life and better foam control compared to the semi-synthetics of the previous generation. It provides excellent cooling and mechanical lubricity, along with the machine-friendly properties you expect from a premium TRIM® coolant. Works very well in mixed metal situations. It significantly extends the lifespan, does not contain biocides or fungicides It does not contain boron or formaldehyde Low foaming for demanding high-volume, high-pressure applications Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminum alloys An excellent alternative to high mineral oils on high silicon aluminum alloys It does not contain any nitrites, phenols, chlorinated or sulfur EP additives Provides excellent corrosion protection on all ferrous and non-ferrous metals It does not pollute machines and leaves a minimalist soft liquid film for easy cleaning and reduced maintenance Easy recycling and disposal Approved by: Fokker GE Aviation Lockheed Martin/Sikorsky Northrop Grumman Raytheon Technologies/Collins Aerospace/Pratt & Whitney Safran Group

TRIM® ML55B

Liquid for micro-droplet lubrication TRIM® ML55B is a high-performance microlubricant based on vegetable esters. It is fully compatible with all “micro lube” and micro-mist systems. TRIM® ML55B contains a mixture of ecological materials that are friendly to the environment and also to the operator. It provides a very high level of EP boundary lubrication to control BUE and sliding friction. The TRIM® ML55B outperforms the competition in cutting, drilling, tapping, reaming and milling. In situations where it is impractical to use a microlube applicator, TRIM® ML55B can be manually applied to the tool or workpiece. Outperforms more expensive products Environmentally friendly, based on renewable resources Very low fog Supports excellent surface finish and tool life, is compatible with all materials Very high level of lubricity with a minimum amount of liquid at the cutting point for high material removal rates It has been thoroughly tested and proven in all major brands of micro lube applicators

TRIM® OE105

Ester-based superfinishing oil TRIM® OE105 is a clean, ester-based grinding oil, made for fine grinding and superfinishing. TRIM® OE105 guarantees excellent lubricity and at the same time keeps grinding wheels and stones extremely clean. This ensures fantastic finishes on hardened steel alloys, stainless steels and non-ferrous materials. Excellent extreme pressure additives for effective metal removal Very high lubricity Excellent detergency The fully saturated ester ensures unsurpassed oxidation stability Ester-based formulation ensures very low mist potential Very high flash point for a low viscosity product Compatible with alloys containing copper Light color and low odor for good acceptance by operators

TRIM® OE209

Ester-based cutting and grinding oil TRIM® OE209 is a medium weight cutting oil made from highly stable, fully saturated esters. The product is certified as easily biodegradable. TRIM OE209 is intended for use in grinding and machining hardened steel alloys, tool steels, stainless steels and carbides. TRIM OE209 provides lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly suitable for use in sliding head machines with high pressure chip breaker units. Extremely high lubricity guarantees a fantastic lifetime of the tool Excellent cleaning ability keeps grinding wheels clean Does not leach cobalt from carbide tool alloys Without chlorine and sulfur Easily biodegradable The saturated ester formulation ensures very low foam and mist Very high flash point Unsurpassed oxidation stability Compatible with alloys containing copper Light color and low odor for good acceptance by operators

TRIM® OE315 NS

Cutting oil based on vegetable esters TRIM® OE315 NS is a high-performance cutting oil made from renewable vegetable esters. For use in very demanding machining processes of hardened steel, tool steels and stainless steels. TRIM OE315 NS is particularly effective in deep hole drilling applications due to its relatively low viscosity, lubricity and EP performance. Excellent extreme pressure additive for effective metalworking Extremely high lubricity guarantees a fantastic lifetime of the tool Low viscosity ensures excellent chip removal when drilling deep holes Ester-based formulation ensures very low mist potential Very high flash point Good oxidation stability Compatible with alloys containing copper Light color and low odor for good acceptance by operators

TRIM® OG108

High-performance oil for grinding carbide and HSS tools TRIM® OG108 is a very high specification grinding oil formulated for carbide and HSS grinding operations. The product uses a highly refined hydrocracked base oil which ensures very low mist levels and a high flash point. TRIM® OG108 has been developed to provide excellent grinding wheel flushing properties along with good friction reduction and workpiece cooling. Highly refined base oil ensures low mist and high flash point Good rinsing properties, keeps grinding wheels very clean It reduces friction and ensures a long life of the disc Excellent heat transfer properties Excellent oxidation stability Highly filterable in filter systems Low foaming No reaction with cobalt Suitable for machining parts and elastomers Light color and low odor

TRIM® SC536

Semi-synthetics with low oil content TRIM®SC536 is a semi-synthetic, low-oil coolant that delivers a significant performance improvement over previous generations of metalworking fluids. TRIM®SC536 is a proprietary formulation of specially synthesized oil and synthetic technologies blended to provide unmatched performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest cartridge life available. Very low foaming Provides excellent corrosion inhibition on all common ferrous alloys Keeps your machines clean and leaves a soft liquid film that protects the bare metal parts of machine tools – this film washes off easily with a cooling working solution for easy machine cleaning Excellent extreme pressure (EP) lubricity for many grinding, drilling and threading operations without the need for chlorine or sulfur based additives The extremely fine emulsion reduces total operating costs Exceptional durability and very good drainage of tramp oil Very low initial level of odor which usually disappears within two days Minimizes the build-up of sticky residue

TRIM® TAP NC

Chlorine-free taping fluid TRIM® TAP NC is a blend of synthetic, plant-based lubricants and additives with strong friction-reducing properties. Use on low machinability metals at full power for flooding applications including broaching, cutting, milling, threading, gear cutting, punching and reaming. Especially for faucets up to 25 mm in diameter It guarantees an excellent surface It ensures the control of the size of the parts Provides extremely long tool life It reduces the friction of the side of the tool Compatible with most TRIM ® fluids Use for greater lubricity in extremely demanding operations

TRIM ® HyperSol™ 888NXT

Neo-synthetic fluid for machining in the aerospace industry

WEDOLiT CN 5370-12

High performance cutting oil WEDOLiT CN 5370-12 is a low-viscosity, water-insoluble, high-performance cutting oil based on the latest GTL-baseoiltechnology, which was developed for thread cutting operations. The product is also suitable for general cutting operations of high-alloy steels, cast iron, aluminum and non-ferrous metals. A high performance product that results in excellent surface finish and dimensional accuracy Special additive for thread cutting Highly reduced oil mist formation, almost no evaporation losses It reduces friction and wear, thus contributing to a long tool life It offers high cooling properties with very good wetting Very good flushing properties with optimal chip transport Easily removable with organic or alkaline industrial solvents cleaning agents

WEDOLiT FW 9200

Water-miscible fluid, especially for drawing brass cases (bullet manufacturing) WEDOLiT FW 9200 is a water-miscible forming lubricant based on esters, which can be universally used in the forming (especially drawing) of brass and non-ferrous metals. It can be used undiluted as a concentrate Stable load capacity and homogeneous sliding behavior Reduces friction and wear, thus contributing to a long tool life Excellent wetting ability and film formation without adhesion

Enter the search term

drlab.sk - Distribútor kovoobrábacích kvapalín TRIM®, produktov Master STAGES™ a WEDOLiT ™ pre Slovenskú republiku.

Certificates

WEDOLiT

Merchant with VMO

AEROSPACE